Level Set Attenuators

The Level Set Attenuator is used to adjust power, reduce reflection interaction, and provide isolation where needed. Adjustment is accomplished by loosening the clamping screws and raising or lowering the Mylar vane by hand until the desired attenuation value is achieved and then re-tightening the screws. These attenuators provide reliable performance when continuously variable settings are not required. Level Set Attenuators are available in sizes WR3 to WR42. Sizes WR2.8 and WR2.2 are also available upon request.

Ordering Example:

LA22R is a Level Set Attenuator in WR22 with Round flange hole patterns.

Quantity Part Name WR Frequency (GHz) VSWR WG A DIM(in) WG B DIM(in) Length-A(in) Flange
LA42S4218 - 26.51.15:10.420.17*S 0.875
LA28S2826.5 - 401.15:10.280.14*S 0.750
LA22R2233 - 501.15:10.2240.1122R 1.125
LA19R1940 - 601.15:10.1880.0941.8R 1.125
LA15R1550 - 751.15:10.1480.0741.6R 0.750
LA12R1260 - 901.2:10.1220.0611.5R 0.750
LA10R1075 - 1101.2:10.10.051.4R 0.750
LA8R890 - 1401.2:10.080.041.3R 0.750
LA6R6110 - 1751.2:10.0650.03251.3R 0.750
LA5R5140 - 2201.2:10.0510.02551.3R 0.750
LA4R4170 - 2601.2:10.0430.02151.2R 0.750
LA3R3220 - 3251.2:10.0340.0171.2R 0.750